FPCAC14A
●
FPCAC14B
●
FPCAC14C
World-wide AC Adapter
Connecting the AC Adapter
0
Operating Instructions
To connect the AC adapter to your system:
These instructions provide details on using the
Fujitsu FPCAC14A (US), FPCAC14B (UK), and
FPCAC14C (Euro) AC adapters.
1. Plug the AC power cord into the AC adapter.
2. Plug the outlet end of the AC power cord into
your AC wall outlet.
Note: The only difference between the three AC adapter
models is a variation in the supplied AC power
cords. These operating instructions are applicable
to all three adapter models.
3. Plug the DC power cord into the DC input
connector on your computer, port replicator,
docking station, or cradle.
4. Confirm that the AC adapter is now supplying
The AC adapter is designed for use with your
Fujitsu computer. Note that the AC adapter can also
be used with external battery chargers, docking
stations, port replicators, and cradles designed for
use with your system.
power to your computer or other device. Refer to
the user documentation for your system, if
necessary, to determine how computer indicates
external power is connected.
You can now use your system with external power
supplied by the AC adapter.
Caution
• This AC adapter is for indoor use only. Do not
use where exposure to water or excessive
moisture is possible.
Disconnecting the AC Adapter
To disconnect the AC adapter:
0
• This AC adapter generates a magnetic field
that can damage your floppy disk drive.
Maintain a safe minimum distance (about 3
inches or 8 centimeters) between the AC
adapter and your floppy disk drive.
1. Disconnect the DC output cord from your
computer or other device.
2. Unplug the AC adapter from your AC wall
outlet.
Troubleshooting
0
0
If the AC adapter is not supplying power to your
computer, check the following:
• Ensure that power is supplied to your AC wall
outlet.
AC Adapter Module
• Ensure that the AC power cord is firmly plugged
into the AC adapter and the AC wall outlet.
• Ensure that the DC Power Cord is firmly seated in
the DC input connector.
AC Power Cord
(to AC outlet)
Specifications
0
DC Power Cord (to system)
Specifications for the AC adapter are shown in the
following table.
AC Adapter Specifications
Input
100-240 VAC
50-60 Hz
1.2 A max
AC Adapter Features
Output
16 VDC, 3.36 A max
DC output plug polarity
Center: positive (+)
Sleeve: negative (-)
0
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited © 2000 Fujitsu PC Corp.
7/00
Page 1 of 1
58-0755-00A
|