24V DRIVEN, FTP-607 Series
2” HIGH SPEED THERMAL PRINTER
FTP-627MCL353/354 #01 / #02
■ OVERVIEW
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
■ HIGHLIGHTS
• Ultra compact
Height 26.4 mm, width 83.5 mm, depth 43.0 mm
FTP-627MCL354
• High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Auto Cutter
Full cut type (#01) and partial cut type (#02) printers are
available.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
1
FTP-627MCL353/354
■ SPECIFICATIONS
Item
Specification
Interface
Conforms to RS232C / Centronics
24 VDC average current, 1.5A (2.2A peak)
(print ratio: 25%, print speed: 100mm/sec. )
For print head
Power
supply
For motor
For cutter
For logic
24 VDC ± 5%, 1A maximum
5 VDC ± 5%, 1A maximum
5 VDC ± 5%, 0.1 A maximum
83.5 x 43.0 x 26.4 mm (WxDxH)
Approximately 120g
Dimensions Mechanism with cutter
Weight
Mechanism with cutter
Pulse resistance: 50 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance 50km
(print ratio: 25% or less)
Head
Life
Cutter
300,000 cuts
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0˚ C to 50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release
Detected by sliding switch
High Sensitive Paper TF50KS-E4 (Nippon Paper)
Standard paper:
Medium Life Paper
Long Life Paper
TF60KS-E(Nippon Paper), FTP-
020PU001 (58mm), PD105R (Oji Paper),
FTP-020P0701 (58mm)
TF60KS-F1, FTP-020P0102 (58mm),
PD170R (Oji Paper), P220VBB-1
Mitsubishi Paper)
Recommended thermal sensitive paper
PD160R-N (Oji Paper), AFB-235
(Mitsubishi Paper), TP50KJ-R (Nippon
Paper), HA220AA (Nippon Paper)
*+5˚C to +40˚C printing density assurance rance.
3
FTP-627MCL353/354
■ DIMENSIONS
1. Printer mechanism
FTP-627MCL353
FTP-627MCL354
at release
at close
80.5
83.5
1
at release
at close
26.4
1.2
38.6
58 +0
26.4
38.6
(paper width)
-1
3 MAX
3 max.
33.7
(37.2)
(37.2)
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
4
FTP-627MCL353/354
1. Connector (FPC) specification (CN4)
(1) Connector
Mechanical unit side:
FPC connector
Remote side (housing site):
52610-3090 (made by Molex)
(2) Pin assignment on the mechanical side
Signal
PHK
I/O Contents
No
1
—
—
O
—
O
—
—
—
—
I
Photointerrupter (Cathode)
2
VSEN
PHE
SW
SW
VH
Ground power supply for paper sensor
Photointerrupter (Emittor)
Platen open switch
3
4
5
Platen open switch
6
7
VH
Power supply for thermal head
8
VH
9
NC
Not connected
Clock
10 CLK
11 LAT
12 STB2
13 STB1
14 GND
15 GND
16 GND
17 GND
18 GND
19 GND
20 TH
I
Print data latch
Strobe 2
I
I
Strobe 1
—
—
—
—
—
—
O
—
I
Ground power supply for thermal head
Thermistor
Power for logic
Strobe 3
21 VDD
22 STB3
23 DI
I
Print data in
24 VH
—
—
—
I
25 VH
Power supply for thermal head
Stepping motor excitation signal
26 VH
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
I
5
FTP-627MCL353/354
Sensor (Photo-
interruptor)
Platen unit
Thermal head
Motor
FPC
Connect terminal:
surface side
Connector No
30,29, .....................2,1
(FPC pin numbers)
2. Cutter (CN5)
Connector on control circuit side: B4B-PH-K-S (J.S.T. or equivalent)
No. Signal I/O
Contents
No. Signal I/O
Contents
Cutter position
detect switch
Home position
detect switch
1
3
SW1
M+
-
2
4
SW2
M-
-
Stepping motor
coil excitation
Stepping motor
coil excitation
O
I/O
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
Fujitsu Component Limited
Gotanda-Chuo Building
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/12/2004.
6
|
Extron electronic Stereo Receiver HFX 100 RX User Manual
Extron electronic Switch 305SA User Manual
Fisher Price Bouncy Seat V8606 User Manual
Fisher Price Riding Toy T3857 User Manual
Fujitsu Printer FTP 621MCL351 User Manual
GE Double Oven JGSP28 User Manual
Generac Portable Generator 5500EXL User Manual
GE Water Dispenser GN1S15CBL REV 2 User Manual
GE Water System GXSF40H User Manual
Goodman Mfg Air Conditioner 000 &12 User Manual